Multiplex Elapor color | Orange | 150ml #602705
Perfectly adhering and opaque colors for construction foam surfaces and ELAPOR® models.
The new recipe makes processing much easier:
• Results in perfect satin finishes
• Short drying times
• Optimum coverage
• New formula: no primer required
• Practical 400ml can at an affordable price
• Also suitable for Depron and Styrofoam models
EC – ELAPOR-COLOR is tailored to the special requirements of foam surfaces. A special primer function has been added to the new formula, so no additional primer is required. Let your imagination run wild. The color impresses with its excellent coverage. The paint is scratch-resistant and weather-resistant! In addition, the paint adheres to all common construction foams, whether based on Depron or EPS.
For optimal painting results, please note the following processing instructions:
Shake the can well for 2 minutes before applying the paint.
The spray head must be clean. First spray test on the test surface or in an inconspicuous area.
Signal word Danger
Danger warnings:
H222 Flam. Aerosol 1: Extremely flammable aerosol.
H229: Container is pressurized: May burst if heated
H315 Skin Irrit. 2: Causes skin irritation.
H336 STOT SE 3: May cause drowsiness or dizziness.
H411 Aquatic Chronic 2: Toxic to aquatic organisms with long lasting effects. Safety instructions:
P210: Keep away from heat, hot surfaces, sparks, open flames and other types of ignition sources. Do not smoke.
P251: Do not puncture or burn, even after use.
Avoid the release of P273 into the environment.
P362+P364: Remove contaminated clothing and wash before reuse.
P403+P233: Keep container tightly closed in a well-ventilated place.
P410+P412: Protect from sunlight and do not expose to temperatures exceeding 50°C.
