Konect | Hobbywing Brushed Car Controller | 1/10 | 40A | Waterproof # KN-BRUSH40
Konect your reliable partner when it comes to getting the maximum performance out of your RC car.
The 40A continuous load controller is waterproof and has a BEC which provides 5V with 2A power and is therefore sufficient for all areas of application common on this scale. A jumper can be used to easily switch between LiPo and NiMH operation, no time-consuming programming is necessary. Reverse travel can also be simply deactivated if necessary, which can be an advantage when racing.
Last but not least, the controller also has a number of safety systems to protect the electronics such as LiPo battery & controller from damage due to overheating or undervoltage, for example.
FEATURES:
The ideal controller for almost all vehicles on a 1/10 scale, whether off-road or on the slopes, whether touring cars, buggies, drifters, rallies, short courses, monster trucks, stadium trucks or trugs. With the electronic brushed controller Konect 40A WP you will have maximum driving pleasure, mega performance and zero problems.
Waterproof & Dustproof Regulator
Powerful 5V BEC with 2A
Aluminum heat sink for optimal cooling during operation
On / off switch
Proportional accelerator & brake for a sensitive driving behavior
Reverse gear can be deactivated
Suitable for LiPo batteries
complete Ready for connection for battery & motor (plug & play) no more soldering necessary
TECHNICAL SPECIFICATIONS:
Continuous current: 40A
Peak current: 180A
Input voltage:
2-3S LiPo batteries
5-9 cell NiMH / NiCd batteries
BEC output power: 5V / 2A Internal resistance: 0.002 Ohm
Motor limits: 2S LiPo / 6Z. NiMH = more than 12 turns, 550 & 540 size motors RPM less than 30,000 @ 7.2V, 3S LiPo / 9Z. NiMH = more than 18 turns, 550 & 540 size motors RPM less than 20,000 @ 7.2V
Type: brush motors (no brushless)
Connector system: Battery side: Tamiya connector
ESC / Motor: 4mm gold contact sockets
Recipient: JR / Graupner
Dimensions approx .: 46.5 x 34 x 28.5mm
Weight: about 65g
