Extron Brushless Controller IQ-30 # X4031
Extron iQ brushless controllers impress with their high quality, performance and reliability. They fit perfectly with all commercially available brushless motors (external or internal rotor) and are of course the first choice for Extron brushless motors. Either LiPo, NiMH or NiCD batteries can be used as batteries. The number of cells is automatically recognized by the controller. Thanks to the use of modern, high-quality SMD components, the internal resistance of the controller is particularly low. The high clock frequency enables high-resolution and sensitive control behavior.
Highly flexible and temperature-resistant silicone cables underline the high quality. The controls can be set easily and self-explanatory either with the throttle stick on the remote control transmitter or the optionally available programming card # X4036.
Technical specifications
Cell count = 2-4 LiPo / 5-10 NiMH / NiCD
Load (duration) = 30A
Load (short term) = 40A
Integrated receiver power supply (BEC) = 5V / 2A
Weight = 26g
Dimensions = 25x43x10mm
Adjustable functions
- brake (on / off)
- Motor direction of rotation (forward / backward)
- Battery type (LiPo / NiMH / NiCD)
- Shutdown behavior (normal / soft)
- cut-off voltage for LiPo (2.8V / 3.0V / 3.2V)
- Cut-off voltage for NiMH / NiCD (50% / 60% / 65%)
- Helicopter mode / governor (RPM OFF / level 1 / level 2)
- Start behavior (normal / soft / very soft)
- timing (AUTO / 7-22 / 22-30)
Product features
- Particularly low internal resistance
- High PWM clock frequency
- Dynamic brake for folding propellers
- Temperature fuse
- Overcurrent fuse
- Easy to set up with the optional programming card
- Soft start with little torque and start-up protection
- Motor shutdown if there is no transmitter signal or interference
- High quality silicone connection cable
- Maximum reliability
Special accessories (recommended)
Programming card for iQ controller, # C4036
